20200627_124857.jpg

Starting out fresh.

20200627_131553.jpg

Soldering to the RasPi. Note that pin 3 is shorter than the others.

20200627_131920.jpg

Stripped the other end of the patch lines.

20200627_132138.jpg

Yeah, I didn't solder that right. I had to re-do it.

20200627_132150.jpg

Nicely tinned stranded wires.

20200627_133513.jpg

Fixing up the solering job I did.

20200627_133655.jpg

RasPi reseated in the case, sensor and wires fed through the connection slot in the bottom.

20200627_133705.jpg

Not too shabby, if I do say so myself.

20200627_133730.jpg

Now, how to attach the sensor...

20200703_183613.jpg

Sensor zip-tied to my rack. I put Audra's case on upside down, which is why the hostname tape is inverted. In hindsight, I shouldn't have attached the temperature sensor right on top of the CPU while it's running.